adjusting tps
February-16th-2003 | 01:25 AM
#1
Thread Starter
Protege Enthusiast
Joined: Apr 2002
Posts: 95
From: san antonio,texas
adjusting tps
i seem to have lost my haynes manual and i need to adjust my tps. if anyone could give me the info on the 1.8 sohc engine it would be greatly appreciated. also, dont you need a certain size feeler gauge or sumthin. thanks.
February-27th-2003 | 11:42 PM
#3
Registered User
Joined: Feb 2003
Posts: 40
Feeler gauge and a volt-meter actually... I can't give you the exact details but it is probably the same way as you adjust it on the mx6/probe/626
it needs to read above a certain voltage at WOT and within a certain voltage at idle
sorry that I can't be of much help!
it needs to read above a certain voltage at WOT and within a certain voltage at idle
sorry that I can't be of much help!
Thread
Thread Starter
Forum
Replies
Last Post
pasta323
1st gen/323/GLC Engine and Drivetrain
5
October-10th-2002 06:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)