BPT Swap questions
June-14th-2003 | 10:04 PM
#1
Thread Starter
Protege Newbie
Joined: Mar 2003
Posts: 7
From: Tampa Bay FL
BPT Swap questions
Im doing the bpt swap and I need a little help with the wiring.
I have the full wiring loom and the bp-26 ECU but no MAF. What USDM cars came with a MAF that is compatible with the GTX? One more thing, Dose anyone happen to have a wiring diagram to show what the large white plug under the ecu controls?
I have the full wiring loom and the bp-26 ECU but no MAF. What USDM cars came with a MAF that is compatible with the GTX? One more thing, Dose anyone happen to have a wiring diagram to show what the large white plug under the ecu controls?
June-14th-2003 | 10:13 PM
#2
Registered User
Joined: Sep 2001
Posts: 2,367
From: Huntington Beach, CA Uhhh Surfs up Dude
I could be wrong, but i was pretty sure the GTX used the same vane air flow (VAF) meter that the USDM BPs did. But an upgrade would be to use the 86-89 RX7 VAF.
you'll have to give me wire colors for the plug, but it looks like the circurt opening relay or some juntion plugs.
you'll have to give me wire colors for the plug, but it looks like the circurt opening relay or some juntion plugs.
Thread
Thread Starter
Forum
Replies
Last Post
slip415
1st Gen Protege/323/GLC
5
December-12th-2002 05:56 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)