Head Swap ?'s
#1
Head Swap ?'s
OK, I found out it's only a SOHC. Damn. I feel stupid now... I guess just because it's 16V doesn't make it DOHC.
But enough about me, onto the questions.
What do I all need (besides the head obviously) to do a head swap? Do I need to get a new crank pulley or ECU?
Also, what heads are interchangable? I've heard something about the Miata head, and isn't the 1.8L Escort GT the same head too?
And finally, what can I expect to pay for the head, if it's in good shape, complete? How much for a bare head?
Thanks a lot in advance for your answers, even though I'm sure these questions have been asked a million times.
But enough about me, onto the questions.
What do I all need (besides the head obviously) to do a head swap? Do I need to get a new crank pulley or ECU?
Also, what heads are interchangable? I've heard something about the Miata head, and isn't the 1.8L Escort GT the same head too?
And finally, what can I expect to pay for the head, if it's in good shape, complete? How much for a bare head?
Thanks a lot in advance for your answers, even though I'm sure these questions have been asked a million times.
#2
If you're sure this question's been asked a million times, do a search.
Top right corner of your screen.
Off the top of my head.
Intake Manifold, probably the exhaust manifold, Timing belt, ECU, Distributor(?), ll related gaskets.
Cost?? I don't know, you might be able to find a deal at a Junkyard.
You can use the head from an Escort GT Miata, Pro, POssibly a Kia Sephia.
Top right corner of your screen.
Off the top of my head.
Intake Manifold, probably the exhaust manifold, Timing belt, ECU, Distributor(?), ll related gaskets.
Cost?? I don't know, you might be able to find a deal at a Junkyard.
You can use the head from an Escort GT Miata, Pro, POssibly a Kia Sephia.
#4
Glad I could help a member named Bizob did the Swap I think, you might find some of his posts on it. I think thats who did it but I'm not 100%
I don't even know if it IS the sephia, but it is some model of kia
I don't even know if it IS the sephia, but it is some model of kia
#5
you can use the kia sephia 95-97 1.8l DOHC head,protege DOHC 90-97,escort gt 90-94, and you have to change the water pump, timing belt, intake manifold, exhaust manifold, ign distributor, and remember you will not have the same power as a oem DOHC because the difference in compression but if you are not going to turbocharge you car you can use the miata pistons they are 10.0 comp also I recomend to use a BP09 ecu because the redline is 7500rpm and a AFM from a RX7 it has more flow, DOHC injectors.
#7
Here in the states it's cheaper. There's a j/y down in Milwaukee (Wisconsin) where my buddy got a complete turbo motor (including turbo) for his Eclipse for $250 I'll try to find a phone number so we can see if they have any Pro's.
Thread
Thread Starter
Forum
Replies
Last Post
amrit
Exterior/Interior/Audio
8
August-22nd-2004 01:17 AM
vtec-this
1st gen/323/GLC Engine and Drivetrain
4
December-5th-2003 10:39 AM
itr0754
1st Gen Protege/323/GLC
11
February-27th-2003 09:04 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)