Setting Tranny/Throttle Pressure
April-28th-2003 | 05:00 PM
#1
Thread Starter
Protege Newbie
Joined: Apr 2003
Posts: 15
Setting Tranny/Throttle Pressure
1990 Protoge, SOHC, automatic tranny.
Have swapped out a slipping tranny for a used tranny with 77K miles on it. Cost: $400. The throttle cable going to the tranny needs to be adjusted to set the correct tranny main pressure (at idle). The Chilton's manual shows a test port on the front left of the tranny, but it is not the right port as it is not pressurized at idle, only in second gear. Does anyone know where the correct port is for setting the idle pressure?
Have swapped out a slipping tranny for a used tranny with 77K miles on it. Cost: $400. The throttle cable going to the tranny needs to be adjusted to set the correct tranny main pressure (at idle). The Chilton's manual shows a test port on the front left of the tranny, but it is not the right port as it is not pressurized at idle, only in second gear. Does anyone know where the correct port is for setting the idle pressure?
Thread
Thread Starter
Forum
Replies
Last Post
terenkleon
Off-Topic
2
February-22nd-2012 01:55 AM
2003ProtegeES
Exterior/Interior/Audio
4
January-14th-2003 07:33 PM
fencepost
3rd Gen Protege/MazdaSpeed/P5/MP3
18
June-24th-2002 02:43 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)