any of you know the specs of the 3 bolts that bolt up to the block for the jack shaft? i ordered the jack shaft through car-part.com and the bolts didnt come (wasnt expecting them to send them).

 

what is a jack shaft

 

i know that the dohc engines have em. the jack shaft (aka inermediate, half). the passenger side axle is basically 2 axles to help with torque steer. the jack shaft has a bracket on it which bolts to the block, i need to know the specs of those bolts.

 

ohh ok ,, yeah my 1.5 has them ... damn and the dealer won't tell you neither ,,
give them a shoot see what happens. or you may just have to use different bolts to find out which one fits...
bruce

 

well
hows about this

I can't give you the lengths of the bolts or diameter but

I can provide you with the torque specs for these bolts and give you the reinstallation procedure for which bolts go in first by the stock japan factory repair manual.


tighten the bolts in this order

3

1--------2

use this as a torque spec...
Tightening torque:
42-62 N.m (4.3-6.3 m-kg, 31-46 ft-lb)

thats all i can give you
hope this helps out

 

the 3 in that was supposed to look like it was directly over the number 2

sorry