I need help
April-7th-2004 | 12:30 AM
#70
Thread Starter
Registered User
Joined: Mar 2004
Posts: 63
From: nebraska
were do u guys get clear corners for the 1st gen? and do they make intakes for a sohc? and if i put on dropzone 2 inch drop springs how far will that be off the ground? by the way did any of u have a sohc that u swaped with a gtr or a gtx engine?
thanks
thanks
Last edited by protegespeed; April-7th-2004 at 12:33 AM.
April-7th-2004 | 05:14 AM
#71
That's right i'm an Admin
Joined: Dec 2001
Posts: 261
From: Ottawa, ON
this tread went from bad to worse.
Robert stewfoo man.
Protegespeed, i'm sorry but there is nothing for your car... if you are serious about power go get a paper route and save up. you will need a DOHC before anything is worth while.
also DO a ******* search.
S-E-A-R-C-H
or better yet scroll down. and read the threads from the last 30 days
Robert stewfoo man.
Protegespeed, i'm sorry but there is nothing for your car... if you are serious about power go get a paper route and save up. you will need a DOHC before anything is worth while.
also DO a ******* search.
S-E-A-R-C-H
or better yet scroll down. and read the threads from the last 30 days
April-8th-2004 | 02:41 PM
#74
Protege Newbie
Joined: Mar 2004
Posts: 10
From: Eatonville, WA
You all are stupid...Go to http://www.corksport.com and you will find everything you need, from engine swaps to key chains. I know these guys from when I did my 1.8 DOHC swap into my 92' MX-3. I'm Probably going to need there help again when I do my BPT swap into my 91' Pro' DX. Anyway...go to their website and take a look. Lata'.