KL-ZE V6 Swap in G2 Proteges....final verdict?
August-12th-2002 | 06:06 PM
#1
Thread Starter
Protege Enthusiast
Joined: Jun 2002
Posts: 79
From: Canada
KL-ZE V6 Swap in G2 Proteges....final verdict?
Well,
I've called A-Spec just now concerning their website claim of the KL-ZE V6 swap into our Proteges. They told me straight up (not quite nicely mind you), that it cannot be done. "Engine bay is too small." they say. So, first off, I'd like to apologize to Jason (jayermesh19) - if I came off sounding too harsh. Although, I still do think that this swap can still be done (for a good price). There are a few more reputable shops in Toronto that are a bunch of Mazda freaks, so I'll be calling them later this week.
On another note, I found something interesting in A-Spec's website. They somehow managed to stick this lip on a 2nd Gen bumper:
That's a MX-3 lip on a 2nd Gen bumper. Very nice, IMO. Cost? Unpainted, it comes to $200CDN plus tax. Painting is an extra $80CDN. Now, I did ask for side skirts and rear skirts, and he basically gave me a half-A$$ed answer: $300CDN for side skirts, $200 Rear skirt. From the way it looks, it doesn't look like a lot of work. In fact, that might be my first mod for my car.
So, at least something good came out of the conversation...
Regards,
Oz
I've called A-Spec just now concerning their website claim of the KL-ZE V6 swap into our Proteges. They told me straight up (not quite nicely mind you), that it cannot be done. "Engine bay is too small." they say. So, first off, I'd like to apologize to Jason (jayermesh19) - if I came off sounding too harsh. Although, I still do think that this swap can still be done (for a good price). There are a few more reputable shops in Toronto that are a bunch of Mazda freaks, so I'll be calling them later this week.
On another note, I found something interesting in A-Spec's website. They somehow managed to stick this lip on a 2nd Gen bumper:
That's a MX-3 lip on a 2nd Gen bumper. Very nice, IMO. Cost? Unpainted, it comes to $200CDN plus tax. Painting is an extra $80CDN. Now, I did ask for side skirts and rear skirts, and he basically gave me a half-A$$ed answer: $300CDN for side skirts, $200 Rear skirt. From the way it looks, it doesn't look like a lot of work. In fact, that might be my first mod for my car.
So, at least something good came out of the conversation...
Regards,
Oz
August-12th-2002 | 09:37 PM
#3
Registered User
Joined: Jul 2002
Posts: 95
From: Belleville, Ontario
Toronto Mazda Freaks
where else are these Mazda freaks in T.? I frequently work in the GTA area, and am looking for parts to supe up my 2G pro.. It would sure save money if it was local instead of US shipping.. i'm doing my car over the winter, since my job provides a van for me.. Any help would be sweet....
August-13th-2002 | 01:27 PM
#4
Thread Starter
Protege Enthusiast
Joined: Jun 2002
Posts: 79
From: Canada
I answered your questions here since the topic of this thread has shifted:
http://www.protegeclub.com/forum/sho...threadid=10714
Regards,
Oz
http://www.protegeclub.com/forum/sho...threadid=10714
Regards,
Oz
August-13th-2002 | 06:09 PM
#5
Thread Starter
Protege Enthusiast
Joined: Jun 2002
Posts: 79
From: Canada
Originally posted by 90&00 Protege
...no mention of 2nd Gen Proteges and corresponding 323s (albeit rare, as they were only sold in Canada for part of 1995).
...no mention of 2nd Gen Proteges and corresponding 323s (albeit rare, as they were only sold in Canada for part of 1995).
I haven't had a chance to call the other shops yet.Regards,
Oz
Thread
Thread Starter
Forum
Replies
Last Post
jgoertzen
1st Gen Protege/323/GLC
12
June-16th-2002 11:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)