3rd gen Engine/Drivetrain Engine/Drivetrain Modification Discussions for 1999-2003 Models Only (BJ chassis)

Air intake options

Thread Tools
 
Search this Thread
 
Old October-8th-2002 | 09:31 PM
  #1  
igator210's Avatar
Thread Starter
Registered User
 
Joined: Oct 2002
Posts: 93
From: Rochester, NY
igator210 is on a distinguished road
Question Air intake options

I've been searching the web for different manufactures of both "Cold Air Intakes" and "Ram Air Intakes" and have come up with some very limited options.

So, I was wondering, besides AEM and Injen, what other manufactures where out there.

I just got a 2003 Protege ES (2.0L Auto) and while I have run across a few manufactures (such as Weaopn-R) that make intakes for the MP3, I'm having diffuculting finding intakes for my engine.

Yes I could just go with either AEM or Injen, but I do like to explore my options.

Thanks


Oh, and what exactly is CARB Exemption?

Last edited by igator210; October-8th-2002 at 10:03 PM.
Old October-8th-2002 | 11:41 PM
  #2  
TrexPro5's Avatar
Ive got that funny feelin
 
Joined: Sep 2001
Posts: 291
From: Columbus, Oh
TrexPro5 is on a distinguished road
hrmm

I *think* the company is MHP and I think ractive makes one as well... Ractive I, personally wouldnt trust. As for CARB Exemption I have no idea, sounds like something to do with a Carberuator (sp?) (we have fuel injection not a carb.)
Old October-8th-2002 | 11:54 PM
  #3  
goldstar's Avatar
Registered User
 
Joined: Aug 2002
Posts: 349
From: New Jersey
goldstar is on a distinguished road
Re: CARB

CARB refers to California Air Resources Board. The controlling authority for emission control regulations in the state.

02 DX Millenium Red
Old October-9th-2002 | 01:36 PM
  #4  
kosmicride
Guest
 
Posts: n/a
Re: hrmm

Originally posted by TrexPro5
I *think* the company is MHP and I think ractive makes one as well... Ractive I, personally wouldnt trust. As for CARB Exemption I have no idea, sounds like something to do with a Carberuator (sp?) (we have fuel injection not a carb.)
You state you do not trust the Ractive items? This is based on what? I have seen many bosal exhaust fall apart at the welds on this forum and others.

Look at the minimal hp increases from using either setup.

I got my ractive intake and exhaust which most likely will boost the same hp as compared to the more expensive items if cost is what your after.
The hp power gains are pathetic for the cost.

I paid a mere $70.00 for my intake and $140.00 for the exhaust 2 bolt flange. I have a price of getting the cat back half done for 55.00 from a local muffler shop.

It is all based on how much you want to support the money hungry people out there.

The Ractive intake is the same as the AEM, INJEN, remember that those are big names and alot of items only have 2-3 real manufactures. So your getting the same but with a name brand.
Unless you get a speacilty built item which is highly doubted. The cost of Tubing dies alone are over $200 for a home bender. The end rubber peices are also peices that are bought from another manufacture. Every company says that they make there items.
This is my opion after being in the Purchasing field and manufacturing fields for about 7 years
You would be surprised that the company that builds bikes for GT also builds Huffy
Old October-9th-2002 | 07:30 PM
  #5  
stealthscotty's Avatar
Protege Enthusiast
 
Joined: Sep 2002
Posts: 67
From: Austin, Tx
stealthscotty is on a distinguished road
Lightbulb

K&N also makes one called the Typhoon, but at $400 U.S. it is way pricey. I haven't seen any pics of the actual Protege part, but for other applications, it looks like the Injen. Not sure if it's a true Cold Air setup or not. I don't mind paying for quality, which K&N is known for, but would like to hear from anyone that has this unit before I jump off a $400 cliff.
Old October-9th-2002 | 08:28 PM
  #6  
kosmicride
Guest
 
Posts: n/a
K&N is a plastic version of all the others out there from what I know.
Old October-9th-2002 | 10:10 PM
  #7  
stealthscotty's Avatar
Protege Enthusiast
 
Joined: Sep 2002
Posts: 67
From: Austin, Tx
stealthscotty is on a distinguished road
Not quite

K&N makes what you are talking about for other apps, but the typhoon is a mandrel bent tube like the injen. Only question is, how long is it? Look at K-Nfilter.com.
Old October-9th-2002 | 10:30 PM
  #8  
igator210's Avatar
Thread Starter
Registered User
 
Joined: Oct 2002
Posts: 93
From: Rochester, NY
igator210 is on a distinguished road
K&N Typhoon

I was looking at this set-up, and have a hard time justifying the $400+ cost.

In looks like a basic CAI.

There are some reviews at http://www.carreview.com but not enough to go on yet.

Thanks for the input
Old October-10th-2002 | 12:25 AM
  #9  
Toru's Avatar
Registered User
 
Joined: Feb 2002
Posts: 253
From: Kelowna, BC
Toru is on a distinguished road
Re: Re: hrmm

Originally posted by kosmicride
You would be surprised that the company that builds bikes for GT also builds Huffy
Ummmm, is it Giant?
Old October-10th-2002 | 03:33 PM
  #10  
walight01
Guest
 
Posts: n/a
www.procarparts.com sells a CAI for 80 bucks but looking at the pic it only looks like a short intake and not a CAI.?????
Old October-10th-2002 | 06:28 PM
  #11  
kosmicride
Guest
 
Posts: n/a
yeah that is a shorty the same thing and looks of the Ractive one I have.
Old October-10th-2002 | 08:31 PM
  #12  
walight01
Guest
 
Posts: n/a
do you have a pic???I am thinking about buy it but i haven't seen it yet, the ad says COLD AIR INTAKE but it is a shorty??Thats wierd
Old October-10th-2002 | 11:44 PM
  #13  
ZZOOOMM's Avatar
Protege Enthusiast
 
Joined: Mar 2002
Posts: 266
From: Chandler AZ
ZZOOOMM is on a distinguished road
R & M racing makes a good cold air intake for 2000-2003 Pro's go to their web site and have a look. I have one and it is awesom. A very clean neet kit that is easy to install and the cold air scoop goes behind the lower grill.
Old October-11th-2002 | 04:34 AM
  #14  
Arghman's Avatar
Protege Enthusiast
 
Joined: Sep 2002
Posts: 282
Arghman is on a distinguished road
The K&N CAI produces a max gain of 7 whp, but i don't have dynos or anything. I don't know how it affects the rest of the powerband. I might get one for free since i prototyped with K&N for my celica GT-S, but those aren't done yet so he said i could have an mp5 one if i wanted. I don't know if i'm gonna do it tho :P
I can guarantee you guys that K&N has the best quality stuff, and they test on at least 4 different cars and they try every year so it works awesome. Injen and AEM CAIs always threw check engine lights on the celicas and it drove people insane, and the K&N was awesome, even when it was a prototype.
Old October-11th-2002 | 02:13 PM
  #15  
walight01
Guest
 
Posts: n/a
what is the R&M racing website



All times are GMT -5. The time now is 12:34 AM.