Need some stock info
#1
Need some stock info
I need this info from a 1.8/2.0 Protege, or if it should be the same as other cars, that info...
This can come from a stock car. (Yes stock also means those with just an intake/ehxaust ir other minor bolt ons)
I need the ambinet oil temp, ambient oil pressure and ambient exhaust gas temp.
This can come from a stock car. (Yes stock also means those with just an intake/ehxaust ir other minor bolt ons)
I need the ambinet oil temp, ambient oil pressure and ambient exhaust gas temp.
#2
Once heated up and at running speeds at an average of 2500 rpm oil PSI is right at 49 psi. At first start it runs up to 80 psi. I know that much. Oil temp should be the same as your water temperature thermostat.
#3
Actually oil temp will run slightly higher than water temp since it doesn't have a radiator and the oil is in contact with hot parts that never come in contact with the water jacket. Usually if your coolant is running 200 deg, your oil will run 215 or so fully warmed up.
Thread
Thread Starter
Forum
Replies
Last Post
J-Protege
Parts For Sale or Wanted
2
May-26th-2007 04:36 AM
00_blue_mp3
3rd Gen Protege/MazdaSpeed/P5/MP3
4
August-9th-2004 05:29 PM
Ped Xing
Exterior/Interior/Audio
5
April-2nd-2004 02:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)