3rd Gen Protege/MazdaSpeed/P5/MP3 General/Maintenance Discussion for 1999-2003.5 Models Only (BJ Chassis)

Need some info on Standard fill up ASAP!

Thread Tools
 
Search this Thread
 
Old May-10th-2002 | 07:53 AM
  #1  
nick's Avatar
Thread Starter
Protege Enthusiast
 
Joined: May 2002
Posts: 140
nick is on a distinguished road
Need some info on Standard fill up ASAP!

Hello all, I changed my fluid last night, I put 3 quarts in,
(synthetic)I used a clear piece of hose, instead of buying a pump, and that worked great for free. But once I was done putting all 3 quarts in the trans, I pushed my pinky finger in the fill hole, I couldn't get it in very far, just enough to go past the inside wall, and I could not feel any fluid or get any on my finger. This doesn't seem normal to me! I also fill my other trans up to the point where I can get it on my finger. , I didn't do this for the MP3, because I assumed the manual was correct. Has anyone else had this low fluid symptom?

The car was level at time of filling it. Please give me your experiences ASAP, as the wife is driving it as I write this.
Old May-10th-2002 | 09:24 AM
  #2  
Don M's Avatar
Protege Enthusiast
 
Joined: Feb 2002
Posts: 72
From: Biloxi MS
Don M is on a distinguished road
Not sure why it's not full to the plug, but you should be OK, as the book says the manual transaxle capacity is 2.9 quarts.

Don
Old May-10th-2002 | 12:57 PM
  #3  
Sir Nuke's Avatar
Master of All Things :{D
 
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Sir Nuke is on a distinguished road
I see now you had the car level....you should be fine.......you may have just THOUGHT you were level...and had it not been even by a little...it could make the difference.
Old May-10th-2002 | 01:05 PM
  #4  
nick's Avatar
Thread Starter
Protege Enthusiast
 
Joined: May 2002
Posts: 140
nick is on a distinguished road
This may seem odd, but when I drained the old fluid out, it appeared to be around 5 quarts in the pan!

I only say 5 quarts, because I use the same pan to drain my oils and my RX takes 5 quarts and it was exactly at the same mark I made on the pan!
Old May-10th-2002 | 05:43 PM
  #5  
Aaron's Avatar
Registered User
 
Joined: Mar 2002
Posts: 250
From: IA
Aaron is on a distinguished road
anyone........ does the car NEED to be level when you fill the fluid back up? seems if i roll my car back down the ramps i won't be able to reach the fill plug since it's so low. how did you guys do it?
Old May-10th-2002 | 06:20 PM
  #6  
Sir Nuke's Avatar
Master of All Things :{D
 
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Sir Nuke is on a distinguished road
the manual trans takes 2.9 US quarts....just put in three....if you KNOW how much you are putting in...no...you don't HAVE TO HAVE it level.
Old May-10th-2002 | 06:22 PM
  #7  
Sir Nuke's Avatar
Master of All Things :{D
 
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Sir Nuke is on a distinguished road
Originally posted by nick
This may seem odd, but when I drained the old fluid out, it appeared to be around 5 quarts in the pan!

I only say 5 quarts, because I use the same pan to drain my oils and my RX takes 5 quarts and it was exactly at the same mark I made on the pan!
Nick...I don't know what to tell ya here buddy....I am going totally on the amount that is listed in the manual as to how much lube goes in the tranny.
Old May-10th-2002 | 07:38 PM
  #8  
Aaron's Avatar
Registered User
 
Joined: Mar 2002
Posts: 250
From: IA
Aaron is on a distinguished road
got in done. there was definately NOT 5 quarts in mine. i put in about 3 quarts of redline mt90. pain in my butt......sort of. i used rhino ramps...... not that high up and the fill plug is kind in an awkward spot. sirnuke....... thanks for the help and the pics.
Old May-10th-2002 | 08:08 PM
  #9  
Sir Nuke's Avatar
Master of All Things :{D
 
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Sir Nuke is on a distinguished road
Aaron....you and everyone else are more than welcome....its why I am here. :{D
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
russeljr2000
Exterior/Interior/Audio
2
December-3rd-2012 10:08 AM
Krunko
Mazda3/Mazdaspeed3
4
July-29th-2004 12:06 PM
MisterT
Exterior/Interior/Audio
2
May-11th-2003 11:32 PM
DoBeR
3rd gen Engine/Drivetrain
3
March-24th-2003 05:49 PM
artfulDodger
3rd Gen Protege/MazdaSpeed/P5/MP3
16
January-27th-2003 09:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:34 PM.