How many kms before first brake pad change
#1
How many kms before first brake pad change
Can anyone let me know about what kms/miles did they change their brake pads?? Prices?
I know it depends on how you drive.
I just got mine changed at Mazda for a price of $250 CANADIAN
my speedometer reading was about 47000 kms which is about 29204 miles
I know it depends on how you drive.
I just got mine changed at Mazda for a price of $250 CANADIAN
my speedometer reading was about 47000 kms which is about 29204 miles
#2
new brake pads
Would like to change my own brake pads when eventually
needed on my 2002 Protege. Is there a good web site or book which details how to do this step-by-step, for a non-mechanic but someone who does all his own scheduled maintenance work?
needed on my 2002 Protege. Is there a good web site or book which details how to do this step-by-step, for a non-mechanic but someone who does all his own scheduled maintenance work?
#5
Richard, you do have to at least loosen that second bolt to rotate the caliper off the rotor right? j/k The 3rd gen calipers use two pain in @$$ wire springs to retain the brake pads in the rotor. I find it easier to remove both bolts so I can hold the caliper upside down in my hand in order to fiddle with the springs.
Originally posted by 90&00 Protege
For the job of simply removing one bolt, flipping the caliper up, pulling the pins and exchanging pads, I'll never pay anybody to do my brakes. Granted, the rear drums are, by comparison, a pain in the ***...too many springs 'n things...but I'll do shoes too...I just don't like doing it for the cloud of brake dust that envelops the area when you take the drum off.
Having them changed at 47,000km seems very quick...so either you drag them (gas foot touching the brake pedal) or you're very hard on them.
For the job of simply removing one bolt, flipping the caliper up, pulling the pins and exchanging pads, I'll never pay anybody to do my brakes. Granted, the rear drums are, by comparison, a pain in the ***...too many springs 'n things...but I'll do shoes too...I just don't like doing it for the cloud of brake dust that envelops the area when you take the drum off.
Having them changed at 47,000km seems very quick...so either you drag them (gas foot touching the brake pedal) or you're very hard on them.
#6
I'd have to agree with you. I think the Haynes series of shop manuals are a bit more user friendly for less experienced do it yourselfers. The step by step instructions, and numerous pictures make things easier to understand if you haven't had a lot of experience working on similar cars. Unfortunately, our cars are relatively new, and Haynes doesn't have a manual out for us yet. Go to their website and send them an email asking for a manual. http://www.haynes.com/
Originally posted by alternator
I have looked at Mazda Protege Shop Manual. It assumes too much prior knowledge to be usable, in my opinion (as well as costing as much as a brake job!). But thanks for your input.
I have looked at Mazda Protege Shop Manual. It assumes too much prior knowledge to be usable, in my opinion (as well as costing as much as a brake job!). But thanks for your input.
Thread
Thread Starter
Forum
Replies
Last Post
nutmegct
3rd Gen Protege/MazdaSpeed/P5/MP3
7
August-18th-2007 06:29 AM
swank
3rd gen Suspension/Brakes
9
May-10th-2004 10:47 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)