Is's all about preferences. In the case of our members here who had these brows fabricated... they actually had the ones you "cared" for done first. However, when tested they obstruct too much of the light and since we get a lot of rainy weather here it just wasn't logical. Secondly, it resembled the lights on the early 90's Civic so they decide to cut it up. If you look closely at the 97-98 dark blue gen 2 on the links I sent earlier they curve downwards to half of the grille.

The signal lights on the bumper on the 2nd pic were blackened out using carbon fiber look film.

 

should have goten myself one while i was there....im sure it will stand out here half way thru the grillor not...hehehe...thanks andy...for the pic..didnt know if i was able to get that in my film....congrats again to you guys...later

 

They look sweet to me ... I actually would rather that style than the one that curves down toward the Grill , but I can make my own so ...
Bruce

 

Hey pollitto,

Do you think you can ask that guy if he could give you some instructions to give to me on how to make those vinyl eyebrows?
Or do you know?

Thanks.

 

I would suggest taking a piece of cardboard and cutting it to the style you want. Keep shaping and cutting and fitting until you're satisfied. Then get a piece of vinyl big enough for the headlight and put the cardboard over it and trace it on to the vinyl. Then FLIP the cardboard and trace it again. Cut with scissors or exacto knife and paste. Vinyl is basically color contact paper. You can always remove it no problem.