I have a 2nd GEN pro and I'm planning to make an enclosure for 2 12" I've been planning on somethin with a neon and some mirrors on the inside. Plus on the mirrors the genie logo. But after some instalation I found out that I will have to stick the amp and the cap on the enclosure cause I don't have much room on the back of the rear seats. I want it sound nice and hard but if I were to decide between looks and sound I would prefer looks.

Can some of you guys post the enclosure pics? I've thought of going thru sounddomain but damn there are too many cars and pics to go thru.

 

I just finished my sealed box this weekend with my buddy. I have two Alpine S10s and a RF 200M. I stuck the RF on the back with the flexible tubing covers running to the top where the sub plugs are. I covered the front wood part of the box in a silver paper stuff that looks like gun metal. I then got some lexan (that I frosted) to cover that over with and put a border around the edge of the lexan (basically is mounted over the subs with two holes cut out for the subs, but it covers those screw holes). I am just waiting on a whole whack of LEDs to come from Ebay. These will be stuck around the border of the box to back light the lexan and make the whole front of the box glow blue. I might even make it bass reactive.... hmmmm.... The other awesome spot for light is the 2nd gens have a lip on the inside of the edge that runs behind the seats (you see it if you flip them down). I am putting a 24" neon tube in there to light up the back of the box where the amp is, as well as mounting some computer LED cooling fans on the amp to ligt it and cool at the same time. Sorry I don't have pics. I will post some ASAP. (friend has the Dcam and he is out.

 

A little hard to imagine.. can you take some pics?