How do I replace a RH Power Mirror
#1
How do I replace a RH Power Mirror
Okay… so how hard is it to replace the passenger side (RH) mirror on my 2004 Mazda 3i. I found one inexpensive on eBay (has anyone ever bought car part(s) from eBay?)and wanted to know how time consuming it would be and how difficult it would be to replace the mirror that some moron knock off because they drove to close to my car – and never stopped.
Last edited by m3forme; March-23rd-2009 at 08:58 AM.
#2
Replacing the entire housing should take you maybe five minutes.
-Open the door
-grab the triangular panel opposite the mirror housing (where the tweeter is if you have it) and pull in and down to remove it
-Unplug the wiring harness connector
-remove three bolts..... 8mm I think. Support the mirror housing as it may come loose with the bolts removed
-remove housing
-reinstall new housing in reverse order.
I have pictures from my heated mirror install if that will help you out.
-Open the door
-grab the triangular panel opposite the mirror housing (where the tweeter is if you have it) and pull in and down to remove it
-Unplug the wiring harness connector
-remove three bolts..... 8mm I think. Support the mirror housing as it may come loose with the bolts removed
-remove housing
-reinstall new housing in reverse order.
I have pictures from my heated mirror install if that will help you out.
#4
Thread
Thread Starter
Forum
Replies
Last Post
saverhinos
Mazda3/Mazdaspeed3
0
November-26th-2012 07:59 PM
blueshark123
Mazda3/Mazdaspeed3
2
July-8th-2011 07:31 AM
jporky99
1st gen/323/GLC Engine and Drivetrain
7
September-1st-2003 08:05 AM
beachnut
1st gen/323/GLC Suspension and Brakes
1
January-18th-2003 10:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)