Mazda 3 Spoiler
Mazda 3 Spoiler
September-21st-2008 | 11:39 AM
#2
Registered User
Joined: Apr 2006
Posts: 504
From: Winston-Salem, NC
Yes it will, however you'll end up with two holes that the old spoiler mounted to that will need to be covered. here's an example pic where someone popped plastic plugs in place and then painted them with touch up paint.
October-19th-2008 | 10:13 PM
#3
Registered User
Joined: Oct 2008
Posts: 27
From: Goldsboro, NC
Hey, that's my car! hahaha. Yeah, the two plugs had to cover holes for the clips that hold the spoiler in place so you can open the hatch to install the bolts. I used interior trim plugs and used touch up paint. The holes are elongated, so I put some silicone on the bottom of the plug and set it in place and let it dry. So far, no leaks.
December-9th-2022 | 08:23 PM
#5
Registered User
Joined: Dec 2022
Posts: 1
Hey, that's my car! hahaha. Yeah, the two plugs had to cover holes for the clips that hold the spoiler in place so you can open the hatch to install the bolts. I used interior trim plugs and used touch up paint. The holes are elongated, so I put some silicone on the bottom of the plug and set it in place and let it dry. So far, no leaks.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)