Routeing wires to new speakers in door?
#1
Routeing wires to new speakers in door?
to those with pr5s that have bought aftermarket speakers and are amplied.I was wondering how you routed new wires from the amp to the speaker? did you have to drill holes?
right now i am deciding weather or not to buy a new amp, this is what i have already
Pioneer DEH6400 HU
Clarion 5x7 SRC5794 for the fronts
rear speakers are stock
dual Clarion 10" subs pwr by Clarion APX401.2
i want to get a Clarion APX401.4 amp for all my door speakers and also the Clarion SRR1684 6.5" speakers for my rear doors. but if its too difficult to to route new wires then i won't bother and will probably save the money for something else.
i was also wondering if it would sound ghetto with the less powerful clarion amp??? (APX201.2 running 2ch @ 2ohms, 2 speakers per ch in parrallel) the THD is MUCH higher at 2ohms but its not as bad as the shitty *** 5% THD from the deck
Clarion APX401.4
New Heat Sink Design
Maximum Power Output 400W
Continuous Average Power Output 200W (50W x 4 into 4 Ohms 20Hz-20kHz @0.05% THD)
Typical 2-Ohm Stereo 90W x 4 @ 0.5% THD
Typical Bridged Power 1kHz 190W x 2 @ 0.5% THD
Bass Extender Control 0~18dB @ 45Hz
Adjustable 55Hz-5.5kHz, 12dB/oct. High/Low Pass Crossover
Mixed-Mode Operation
Bridgeable 4/3/2 Channel Operation
Speaker Level Inputs
Double-Sided Glass Epoxy Circuit Board
Clarion APX201.2
New Heat Sink Design
Maximum Power Output 200W
Continuous Average Power Output 100W (50W x 2 into 4 Ohms 20Hz-20kHz @0.05% THD)
Typical 2-Ohm Stereo 110W x 2 @ 0.5% THD
Typical Bridged Power 1kHz 230W @ 0.5% THD
Bass Extender Control 0~18dB @ 45Hz
Adjustable 55Hz-5.5kHz, 12dB/oct. High/Low Pass Crossover
Mixed-Mode Operation
Clarion SRR1684 6 1/2" Coaxial Speaker (PAIR)
6 1/2" Metal Coated Mica Injected Polypropylene Woofer
?Gyro Imaging? Angled Pivoting Tweeter
Rubber Surround
Strontium Magnet
1/2" Balanced Drive PEI Tweeter w/Neodymium Magnet
Built-in GM 6.5" Adapter
Heat-Resistant Kapton Voice Coil
160 Watt Maximum Music Power
Clarion SRC5794 5" x 7" / 6" x 8" 2-Way Plate Speaker (PAIR)
5" Metal Coated Mica Injected Polypropylene Woofer
Heat-Resistant Kapton Voice Coil
Rubber Surround
Strontium Magnet
1/2" Balanced Drive PEI Tweeter w/Neodymium Magnet
130 Watt Maximum Music Power
________
Suzuki Kt120
right now i am deciding weather or not to buy a new amp, this is what i have already
Pioneer DEH6400 HU
Clarion 5x7 SRC5794 for the fronts
rear speakers are stock
dual Clarion 10" subs pwr by Clarion APX401.2
i want to get a Clarion APX401.4 amp for all my door speakers and also the Clarion SRR1684 6.5" speakers for my rear doors. but if its too difficult to to route new wires then i won't bother and will probably save the money for something else.
i was also wondering if it would sound ghetto with the less powerful clarion amp??? (APX201.2 running 2ch @ 2ohms, 2 speakers per ch in parrallel) the THD is MUCH higher at 2ohms but its not as bad as the shitty *** 5% THD from the deck
Clarion APX401.4
New Heat Sink Design
Maximum Power Output 400W
Continuous Average Power Output 200W (50W x 4 into 4 Ohms 20Hz-20kHz @0.05% THD)
Typical 2-Ohm Stereo 90W x 4 @ 0.5% THD
Typical Bridged Power 1kHz 190W x 2 @ 0.5% THD
Bass Extender Control 0~18dB @ 45Hz
Adjustable 55Hz-5.5kHz, 12dB/oct. High/Low Pass Crossover
Mixed-Mode Operation
Bridgeable 4/3/2 Channel Operation
Speaker Level Inputs
Double-Sided Glass Epoxy Circuit Board
Clarion APX201.2
New Heat Sink Design
Maximum Power Output 200W
Continuous Average Power Output 100W (50W x 2 into 4 Ohms 20Hz-20kHz @0.05% THD)
Typical 2-Ohm Stereo 110W x 2 @ 0.5% THD
Typical Bridged Power 1kHz 230W @ 0.5% THD
Bass Extender Control 0~18dB @ 45Hz
Adjustable 55Hz-5.5kHz, 12dB/oct. High/Low Pass Crossover
Mixed-Mode Operation
Clarion SRR1684 6 1/2" Coaxial Speaker (PAIR)
6 1/2" Metal Coated Mica Injected Polypropylene Woofer
?Gyro Imaging? Angled Pivoting Tweeter
Rubber Surround
Strontium Magnet
1/2" Balanced Drive PEI Tweeter w/Neodymium Magnet
Built-in GM 6.5" Adapter
Heat-Resistant Kapton Voice Coil
160 Watt Maximum Music Power
Clarion SRC5794 5" x 7" / 6" x 8" 2-Way Plate Speaker (PAIR)
5" Metal Coated Mica Injected Polypropylene Woofer
Heat-Resistant Kapton Voice Coil
Rubber Surround
Strontium Magnet
1/2" Balanced Drive PEI Tweeter w/Neodymium Magnet
130 Watt Maximum Music Power
________
Suzuki Kt120
Last edited by pr5owner; March-10th-2011 at 10:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)