Runing Power Wire help ASAP
January-4th-2003 | 02:24 PM
#1
Thread Starter
Protege Newbie
Joined: Jan 2003
Posts: 6
Runing Power Wire help ASAP
Hi guys. I need to know the best place to run my 4gauge wire through the fire wall. I have a 97 lx 5 speed. Are there any holes already in the firewall that I could use, cause I've looked and haven't really seen any. Thanks.
January-4th-2003 | 02:33 PM
#2
Registered User
Joined: Sep 2001
Posts: 2,367
From: Huntington Beach, CA Uhhh Surfs up Dude
Welcome!
I'm sure a G2 driver will chime in, but you could always find a new spot, drill a hole, use a plastic or rubber grommet, run the wire throung the firewall and seal it up with silicone.
make sure to know where your drilling and whats behind it!!!
always use a rubber or plastic grommet when running wires through the firewall or any metal area.
always fuse all power connections with the appropriate sized fuses, and the main audio fuse on your power wire should be within 18" of the battery.
I'm sure a G2 driver will chime in, but you could always find a new spot, drill a hole, use a plastic or rubber grommet, run the wire throung the firewall and seal it up with silicone.
make sure to know where your drilling and whats behind it!!!
always use a rubber or plastic grommet when running wires through the firewall or any metal area.
always fuse all power connections with the appropriate sized fuses, and the main audio fuse on your power wire should be within 18" of the battery.
January-4th-2003 | 04:33 PM
#3
Master of All Things :{D
Joined: Feb 2002
Posts: 4,118
From: southeast texas, near houston
Originally posted by blue LEDz
i don't know about the 2nd gens, but the 3rd gens have a big cluster of wires going through the firewall on the passenger side. look for a large cluster of wires going through the firewall. then just poke a hole through the rubber part around the wires. i poked it with a spike, then duct taped the end of the 4 guage wire to a chopstick. then fed the chopstick through, followed by the wire. it came out under the carpet on the passenger side. good luck.
i don't know about the 2nd gens, but the 3rd gens have a big cluster of wires going through the firewall on the passenger side. look for a large cluster of wires going through the firewall. then just poke a hole through the rubber part around the wires. i poked it with a spike, then duct taped the end of the 4 guage wire to a chopstick. then fed the chopstick through, followed by the wire. it came out under the carpet on the passenger side. good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)