Forced Induction/Nitrous Technical discussions for all power adders - turbos, superchargers, NOS

timing and nitrous

Thread Tools
 
Search this Thread
 
Old December-29th-2004 | 10:26 PM
  #16  
1ofdfew323's Avatar
aLL mOtoR 1.8 dohc
 
Joined: Dec 2002
Posts: 357
From: bay area, california
1ofdfew323 is on a distinguished road
on my NOS i replaced the WOT switch to manual button switch that I placed next to my shift ****. This way I can floor the car on the first geat all motor and then squeeze it at around 5k rpm then shift to 2nd all motor for split sec. then squeeze again & right when I shift to 3rd thats when I dont use all motor. I press that button right when I shift to 3rd.
Old December-31st-2004 | 12:42 AM
  #17  
bbsf2's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 78
From: Freehold, New jersey
bbsf2 is on a distinguished road
i have a zex wet kit and i have it wired up at WOT. i plan on using a 55 shot, but i want to move up to a 65 shot to get a little more power out of it. hoperfully, everything will go as i want it to go and nothing will break. hopefully
Old December-31st-2004 | 12:44 AM
  #18  
Roddimus Prime's Avatar
The man behind the mask
 
Joined: Oct 2003
Posts: 11,572
From: Birmingham, AL
Roddimus Prime is on a distinguished road
I think a 65hp shot would be a little much. a 50hp shot would be just fine. If you do decide to up your jetting make sure to drop heat ranges on the plugs and make sure your fuel system is up to par.

if you start to hear any detonation let me know...I've got some pointers for you.
Old December-31st-2004 | 06:53 AM
  #19  
1ofdfew323's Avatar
aLL mOtoR 1.8 dohc
 
Joined: Dec 2002
Posts: 357
From: bay area, california
1ofdfew323 is on a distinguished road
I know we don't have the same engine but just so you know, I have used 60 shots on my sohc vtec motor w/ everything stock and a 60 shots on my BP (1.8 Dohc). I didn't retard the timing on none of them. They are both running in stock spec. The civic I was using stock plugs but on the BP I had to use the NGK iridiums not because I have to but because I wanted too. (just to be on the safe side).

Just try to use 60 instead of 65 and use premium or 91-up fuel octane.
NGK iridiums are good or you can get the ZEX plugs since you have ZEX kit.
if ur squeezing 65 you might want to retard your timing to 2-3 deg.
and o yeah, by the time you hear that knocking (detonation) its probably gonna be too late. you'd probably put a hole on the piston or a window on the block before you hear that knock.

BTW I have an Air/Fuel gauge. This tells me if my car is runing lean when Im squeezing that button. So far its still reading on the rich side w/ my WOT and 60 shot NOS.

GOODLUCK!!!
Old December-31st-2004 | 07:19 PM
  #20  
bbsf2's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 78
From: Freehold, New jersey
bbsf2 is on a distinguished road
thanks to both of you for your pointers i will take everything into consideration and hoperfully this car will move more than it did. ill keep up on this thread as time goes on to see how she runs thanks.
craig
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gms79
Mazda Service Info
1
October-28th-2008 06:27 PM
nando2323
3rd gen Engine/Drivetrain
14
December-7th-2004 08:32 PM
celticbass
Forced Induction/Nitrous
43
September-20th-2002 10:31 PM
Protege5online
Forced Induction/Nitrous
21
November-9th-2001 12:22 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: timing and nitrous



All times are GMT -5. The time now is 01:11 PM.