Mazda3/Mazdaspeed3 General/Maintenance Discussion of the Mazda3 and MazdaSpeed3

Keyless Entry Malfunction

Thread Tools
 
Search this Thread
 
Old March-30th-2007 | 05:37 PM
  #1  
aleccolin's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 5
From: Blacksburg, VA
aleccolin is on a distinguished road
Keyless Entry Malfunction

2006 3s 5 door. 25k miles. The car just started giving me some crap with regards to the keyless entry.

One night I turned the car off, pulled out the key, and the overhead lights didn't come on. I opened the driver's door and the car beeped at me. I got out, closed the door, and the keyless entry wouldn't respond. I got back in the car, put the key back in the ignition, turned it forward to ignition on, slowly and deliberately turned it back off and pulled out the key and everything worked as it should; overhead lights came on, I opened the door, no beep. Got out, closed the door, and it locked with the remote.

I changed the battery in the remote to be sure, but it has been doing this sporatically for a week now. Quite random. Sometimes it'll work fine getting out, but won't unlock when I get back to the car, other times I'll have to lock it with the key, but it'll unlock with the remote when I return.

It seems like if I turn the key back and remove it slowly it occurs less frequently, but it still happens. Any ideas? It's not the RFID in the key, since it always starts without issue, and the remote works fine, even from a pretty good distance. The problem seems with the car itself and is related to the ignition switch, or something that gets signal from the ignition switch, like the remote reciever or some sort of security control module. Any ideas? It should be covered under warranty, but I'd like to know if others have had similar problems.
Old April-2nd-2007 | 09:28 AM
  #2  
icspots's Avatar
Registered User
 
Joined: Apr 2006
Posts: 504
From: Winston-Salem, NC
icspots is on a distinguished road
Many people have had this problem before, so don't feel bad. The problem lies in either the ignition switch itself, or the little deely that tells the car that there's a key in the ignition (I think they usually just replace the ignition switch). Basically it's sticking and making the car think there's still a key in the ignition when it isn't. That's also why the remote won't work. If you have a key in the ignition then the keyless remotes don't work.

Just take it to the dealer and reproduce the problem and they should replace it for you without giving you a hassle.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
St3althW4rrior
2nd Gen Protege
9
July-7th-2004 12:06 PM
rotaryhardcore
3rd Gen Protege/MazdaSpeed/P5/MP3
1
February-24th-2004 10:29 PM
MazdaMania
Exterior/Interior/Audio
1
October-7th-2003 09:47 AM
Pampusik
Exterior/Interior/Audio
3
March-31st-2003 01:26 AM
MotoFanatic
3rd Gen Protege/MazdaSpeed/P5/MP3
12
April-20th-2002 10:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:54 PM.