Mazda 3 won't start
#1
Mazda 3 won't start
Hi. Ihave a 2005 mazda 3 2.0L. I have a problem with it starting. somtimes it starts other times i have to wait 2-3 hours. When I go to start it all the lights come but it crank over. The starter doest make a sound. If anybody has any ides, please let me know.
Thanks
Thanks
#2
does the engine turn over? if not you might have a bad starter.
#8
Mazda 3 Won't Start
I had the same problem with my 2006 Mazda 3. There is a service bulletin for it listed somewhere on this forum but I can't find it right now. It is an intermittent problem right? If you let it sit for a while then try it again it starts and runs lke there was never a problem right? I printed the bulletin, and tried to show the Mazda service guys near me (Peterborough, Ontario, Canada) and they told me that it wasn't a known problem and the bulletin wasn't Canadian. The service guys in Brampton (where I work) were very quick to recognise the problem and fix me up. Great guys!
The small wire at the the starter has corroded out, and needs to be replaced. I will have another look around here and find the service bulletin for you.
FOUND IT!!
http://www.finishlineperformance.com...7-08-1960a.pdf
The small wire at the the starter has corroded out, and needs to be replaced. I will have another look around here and find the service bulletin for you.
FOUND IT!!
http://www.finishlineperformance.com...7-08-1960a.pdf
Last edited by pbuck; January-3rd-2009 at 03:52 PM. Reason: Found Link to Bulletin
#9
I also have a 2006 Mazda 3 and I've been having the exact same problem. It's like it starts when it wants to and other times it just won't turn over. All the lights and the radio come on but it just won't start. The guys at the dealership told me that there's nothing they can do because every time I bring it in (2 times already) it starts !!!! Thank-you so much for posting the service bulletin. I'm bringing my car in tomorrow and I printed a copy of the bulletin to give to them so that they can fix it...can't believe that they weren't aware of this? Only problem, my warranty expired a few weeks ago. They should honour it since they weren't able to figure it out sooner. Thanks again )
#10
I had the same problem with my '05 last summer. Corroded wire. It was replaced and no problems until this week, when the same problem reappeared. So the repair corrected the problem, but only for 8 months. Very annoying problem for an otherwise solid car.
#11
I'm having the same starting issue with my '06 MAzda 3.
Hi everyone,
My car is currently in the shop for this very issue. My mechanic, being as persistent as he is, found what the Mazda service bulletin had said to be true without even seeing the bulletin.
Were any of you able to get this fixed for free by Mazda? My mechanic didn't do the same exact fix as what the bulletin said but did so something to try and deal with it and still the car failed me yesterday and today.
Thanks!
-Jim
My car is currently in the shop for this very issue. My mechanic, being as persistent as he is, found what the Mazda service bulletin had said to be true without even seeing the bulletin.
Were any of you able to get this fixed for free by Mazda? My mechanic didn't do the same exact fix as what the bulletin said but did so something to try and deal with it and still the car failed me yesterday and today.
Thanks!
-Jim
#12
for an automatic... it should start in neutral or park - try neutral, if that works it's the neutral safety switch.
Also, if you hold the key, see if the security light on the dash flashes - if so there's a problem with the car reading the key RFID. In which case you can try a second key for your car.
Also, if you hold the key, see if the security light on the dash flashes - if so there's a problem with the car reading the key RFID. In which case you can try a second key for your car.
#13
My car is a manual. My mechanic called and said the wire going to the starter is corroded for about 3 inches of the wire starting with part that connects to the starter. So they have to use the replacement/repair kit that Mazda has made available. The kicker is that it can't be delivered to my mechanic until tomorrow afternoon.
Thank goodness for telecommuting :-)
Thank goodness for telecommuting :-)
#15
I had the same problem with my 2006 Mazda 3. ...The small wire at the the starter has corroded out, and needs to be replaced. I will have another look around here and find the service bulletin for you. FOUND IT!!...
http://www.finishlineperformance.com...7-08-1960a.pdf
http://www.finishlineperformance.com...7-08-1960a.pdf
Here's where I'm at. After a few days of wildly intermittent starts, I figured something was up. Next stop, local auto shop. Of course now it starts every time for the shop. I'm. sitting at home kinda annoyed. So I start JFGI. Within a few search results I find this post. And thankfully the pdf download was still active!
Status: sent email to auto shop w/ pdf attachment; awaiting assessment of where they are at with the problem.
03/17/2010, 12:50 PM.