Mazda3/Mazdaspeed3 General/Maintenance Discussion of the Mazda3 and MazdaSpeed3

Mazda 3 won't start

Thread Tools
 
Search this Thread
 
Old December-17th-2014 | 02:24 AM
  #61  
hassanov's Avatar
Registered User
 
Joined: Dec 2014
Posts: 5
hassanov is an unknown quantity at this point
My Mazda is 2005 and I have a problem with its engine.Need a help??
Old January-31st-2015 | 02:07 PM
  #62  
NBachs11's Avatar
Registered User
 
Joined: Jan 2015
Posts: 1
NBachs11 is an unknown quantity at this point
Originally Posted by Jhm427
Can anyone locate this service bulletin for me? The link posted no longer works. I am having this problem with my Mazda 3 not starting intermittently. It always happens after I've been running errands. I get back into my car to go home and it won't turn over. All lights, radio, air, etc. come on OK. Car just won't turn over. Usually if I wait 30-60 minutes, it will eventually start. I've had it to my mechanic 3 times and problem still persists.
I am having exact same problem right now with my 2010 Mazda 3, if you got this fixed or resolved can you let me know please?? I am about to call a mechanic about the wire to the started being corroded and see if that's it. Thanks.
Old April-20th-2015 | 03:28 PM
  #63  
Mz2004's Avatar
Registered User
 
Joined: Apr 2015
Posts: 2
Mz2004 is an unknown quantity at this point
Have the same issue as what you all describing here

Hello,

I just bought a used Mazda 3 2004, 5-speed with 150,000 miles on.
The car won't start at first, I have to try about 8 times in order for it to start.
Once it starts, it works just fine. No check engine light on or anything like that.

Does anyone know why?

Last edited by Mz2004; April-20th-2015 at 11:27 PM.
Old July-1st-2015 | 10:25 AM
  #64  
DaveR's Avatar
Registered User
 
Joined: Jul 2015
Posts: 1
DaveR is an unknown quantity at this point
Originally Posted by NBachs11
I am having exact same problem right now with my 2010 Mazda 3, if you got this fixed or resolved can you let me know please?? I am about to call a mechanic about the wire to the started being corroded and see if that's it. Thanks.
i am having the same issue with my 2010 mazda3 2.5. did you ever resolve yours?
Old July-1st-2015 | 01:48 PM
  #65  
Mz2004's Avatar
Registered User
 
Joined: Apr 2015
Posts: 2
Mz2004 is an unknown quantity at this point
Originally Posted by DaveR
i am having the same issue with my 2010 mazda3 2.5. did you ever resolve yours?
Hello, I just decided to fix it (three days ago). To be honest, I was so scared it would cost lots of money. I ended up paying $125 to my local mechanic. It was a very simple fix according to him. A broken piece in the steering wheel was the issue, I cant recall the name of it. The part itself was only $60 plus $55 in labor.
Old December-27th-2015 | 12:56 AM
  #66  
m3c91745's Avatar
Registered User
 
Joined: Dec 2015
Posts: 2
m3c91745 is an unknown quantity at this point
2010 Mazda3 Intermittent Problem Starting

Originally Posted by DaveR
i am having the same issue with my 2010 mazda3 2.5. did you ever resolve yours?
A friend had the same problem, and the dealer said it was door sensors malfunctioning, replaced two, and the problem appeared to go away but the problem returned 6 months later.

Anyone know if the 2004-2008 starter wire problem also applies to the 2010 model?

Thanks!
Old December-27th-2015 | 05:08 PM
  #67  
jfenh's Avatar
Registered User
 
Joined: Dec 2015
Posts: 1
jfenh is an unknown quantity at this point
Mazda 3 Starters

I have a 2008 Mazda 3isport, with about 105K miles. After five years, the original starter died. Had it replaced with an after market starter. That lasted about six months. Had that replaced with a Mazda starter. That lasted 18 months. Why do these starters keep failing?
Old December-27th-2015 | 08:27 PM
  #68  
m3c91745's Avatar
Registered User
 
Joined: Dec 2015
Posts: 2
m3c91745 is an unknown quantity at this point
Originally Posted by jfenh
I have a 2008 Mazda 3isport, with about 105K miles. After five years, the original starter died. Had it replaced with an after market starter. That lasted about six months. Had that replaced with a Mazda starter. That lasted 18 months. Why do these starters keep failing?
FWIW (and it ain't worth much), your first starter did OK. 105k miles seems OK to me. The second starter sounds like it was poorly made. If your second starter went 105k miles, that'd be about the lifetime of your Mazda3.
Old August-13th-2016 | 01:35 AM
  #69  
Krankzinni's Avatar
Registered User
 
Joined: Aug 2016
Posts: 1
Krankzinni is an unknown quantity at this point
Originally Posted by djs2571
for an automatic... it should start in neutral or park - try neutral, if that works it's the neutral safety switch.
Also, if you hold the key, see if the security light on the dash flashes - if so there's a problem with the car reading the key RFID. In which case you can try a second key for your car.
Thank you thank you thank you it works when I have it on neutral☺.
Old November-10th-2016 | 10:17 AM
  #70  
Excellence91's Avatar
Registered User
 
Joined: Oct 2016
Posts: 2
Excellence91 is an unknown quantity at this point
Please can someone help me out here.... I have a 2006 Mazda 3 1.6L I just changed the top gasket and piston rings am done but its cranking but won't start. Please I need urgent help.
Old January-9th-2017 | 10:02 PM
  #71  
JLLaFleur's Avatar
Registered User
 
Joined: Jan 2017
Posts: 1
JLLaFleur is an unknown quantity at this point
I have an 07 Mazda 3 and it won't start either. I have to use my 900 amp jump starter to get it going. I know it's not the battery it runs everything else fine and it starts up another vehicle I own just fine. Sometimes the car will start on its own after some coaxing and feathering the throttle. Once I get it to start it runs fine though. Any ideas about what the problem is?
Old May-2nd-2017 | 08:34 AM
  #72  
Heather S's Avatar
Registered User
 
Joined: May 2017
Posts: 2
Heather S is an unknown quantity at this point
Cannot find bulletin can someone help. Link is dead

Originally Posted by pbuck
I had the same problem with my 2006 Mazda 3. There is a service bulletin for it listed somewhere on this forum but I can't find it right now. It is an intermittent problem right? If you let it sit for a while then try it again it starts and runs lke there was never a problem right? I printed the bulletin, and tried to show the Mazda service guys near me (Peterborough, Ontario, Canada) and they told me that it wasn't a known problem and the bulletin wasn't Canadian. The service guys in Brampton (where I work) were very quick to recognise the problem and fix me up. Great guys!

The small wire at the the starter has corroded out, and needs to be replaced. I will have another look around here and find the service bulletin for you.

FOUND IT!!

http://www.finishlineperformance.com...7-08-1960a.pdf


does anyone have a copy of http://www.finishlineperformance.com...7-08-1960a.pdf?[/url] This link no longer works and I am desperate to get a copy to fix my Mazda 3 that won't start and it isn't the battery. It was cranking fine and all day wouldnl't turn over and then BAM it worked. Mechanic doesn't want to replace the fuel pump as it is clear it is working and apparently this bulletin explains how to fix this. HELP.
It is an intermittent problem right/ If you let it sit for a while then try it again it starts and runs like there was never a problem. Apparently this bulletin explains the issue and how to fix.
Old May-2nd-2017 | 08:36 AM
  #73  
Heather S's Avatar
Registered User
 
Joined: May 2017
Posts: 2
Heather S is an unknown quantity at this point
Mazda won't start electrical fine and bulletin link doesn't work HELP

does anyone have a copy of http://www.finishlineperformance.com...7-08-1960a.pdf?[/url] This link no longer works and I am desperate to get a copy to fix my Mazda 3 that won't start and it isn't the battery. It was cranking fine and all day wouldn't turn over and then BAM it worked. Mechanic doesn't want to replace the fuel pump as it is clear it is working and apparently this bulletin explains how to fix this. HELP.
It is an intermittent problem right/ If you let it sit for a while then try it again it starts and runs like there was never a problem. Apparently this bulletin explains the issue and how to fix.
Old May-10th-2017 | 02:02 PM
  #74  
Ian Bergen's Avatar
Registered User
 
Joined: May 2017
Posts: 1
Ian Bergen is an unknown quantity at this point
Bulletin Found

I may be mistaken but I believe I have found the bulletin. My 08 5 speed has been having these problems for the past two years. I've changed two starters and i'm still having the issue hopefully this will finally fix the issue.

https://www.mazda3club.com/attachmen...-01-037-08.pdf

Good Luck all.
Old August-2nd-2017 | 12:07 AM
  #75  
Theo Luiz's Avatar
Registered User
 
Joined: Aug 2017
Posts: 1
Theo Luiz is an unknown quantity at this point
2005 Mazda 3

ok my 2005 Mazda 3 won't start it cranks but won't start I change my crank sensor and cam sensor don't know what to do already


Quick Reply: Mazda 3 won't start



All times are GMT -5. The time now is 01:11 PM.