my EDM P5 1.6 8) *finally*
September-4th-2004 | 01:23 PM
#3
Thread Starter
TStar
Joined: Aug 2002
Posts: 229
From: Germany
session3
changes i made (roughly, not all details)
- edm exklusive to edm sportive bumper incl. fogs
- steel to 15" mazda wheels (17" are here, too but no rubber on them yet)
- eibach prokit 30mm
- postert side skirts
- postert eyelids
- msdesign rear wing (from a 92 civic
)
- ath hinsberger / bastuck exhaust 2x76 DTM style
- steering wheel from a mx5/miata
- b&m shifter
- fs-de strut bar worked on to my zm engine
changes i made (roughly, not all details)
- edm exklusive to edm sportive bumper incl. fogs
- steel to 15" mazda wheels (17" are here, too but no rubber on them yet)
- eibach prokit 30mm
- postert side skirts
- postert eyelids
- msdesign rear wing (from a 92 civic
)- ath hinsberger / bastuck exhaust 2x76 DTM style
- steering wheel from a mx5/miata
- b&m shifter
- fs-de strut bar worked on to my zm engine
Last edited by tailland; September-4th-2004 at 02:05 PM.
September-5th-2004 | 09:47 AM
#5
Thread Starter
TStar
Joined: Aug 2002
Posts: 229
From: Germany
well..to get a full postert kit:
front bumper 695€ + no fogs avail + skirts 319€ + rear bumper 442€ + eyelids 58€= 1514€ + painting ~450€ + installation ~450€ = 2414€ TOTAL = 2,911.29 USD
i paid:
bumper (mazda oem) 160€ + additional mount material for conversion 230€ + canadian oem fogs 90€ + skirts 180€ + no rear bumper 8( + eyelids 20€ = 680 + painting 290€ and install ~250€ = 1220€ TOTAL = 1,471.32 USD
that's why .......
(the skirts already had a way bad fitment, i can only estimate how much time it would take to make all of the parts fit properly.)
btw: this is the way my car looked when i bought it .. it was a long way to go where i'm now... but really: it was expensive enough i don't wanna spend additional grands on that car...
front bumper 695€ + no fogs avail + skirts 319€ + rear bumper 442€ + eyelids 58€= 1514€ + painting ~450€ + installation ~450€ = 2414€ TOTAL = 2,911.29 USD
i paid:
bumper (mazda oem) 160€ + additional mount material for conversion 230€ + canadian oem fogs 90€ + skirts 180€ + no rear bumper 8( + eyelids 20€ = 680 + painting 290€ and install ~250€ = 1220€ TOTAL = 1,471.32 USD
that's why .......
(the skirts already had a way bad fitment, i can only estimate how much time it would take to make all of the parts fit properly.)
btw: this is the way my car looked when i bought it .. it was a long way to go where i'm now... but really: it was expensive enough i don't wanna spend additional grands on that car...
Last edited by tailland; September-5th-2004 at 09:50 AM.
September-5th-2004 | 05:01 PM
#8
Thread Starter
TStar
Joined: Aug 2002
Posts: 229
From: Germany
September-5th-2004 | 07:19 PM
#10
Thread Starter
TStar
Joined: Aug 2002
Posts: 229
From: Germany
yes of course i did.. problem: german tuev.... even some stupid intake will cause me a lot of trouble 8(
don't really know what to do .. i could go for camgears or chipping..but that would cost a lot here
maybe the only real hope would be a zl-ve engine if works together with my t25r transmission... if german tuev allows it :\
german tuev sucks big time
don't really know what to do .. i could go for camgears or chipping..but that would cost a lot here
maybe the only real hope would be a zl-ve engine if works together with my t25r transmission... if german tuev allows it :\
german tuev sucks big time
Last edited by tailland; September-5th-2004 at 07:22 PM.
September-6th-2004 | 10:27 AM
#12
Thread Starter
TStar
Joined: Aug 2002
Posts: 229
From: Germany
hm yes, go to http://www.mazda-community.de .. absurd, but it is the largest german online community i know :\
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)