underbody neon pics
March-26th-2003 | 05:55 AM
#16
Registered User
Joined: Dec 2002
Posts: 138
From: Asheville, NC
As for red on my car...the engine is the ONLY thing red. And that was because my Injen CAI had red boots and i just didnt want it to STICK OUT so i did the rest of the engine red. I chose yellow because it goes with the YELLOW car.! LOL
March-30th-2003 | 06:15 PM
#20
Registered User
Joined: Dec 2001
Posts: 1,016
From: Northern VA
Saweet like it. its soo pimp dood! keep up the clean work. i had some green underglow. didint really care for it cause the side tubes stuck out, so i sold it to shawn he has a black P5.
but otherwise! TIGHT
but otherwise! TIGHT
March-30th-2003 | 06:24 PM
#22
Registered User
Joined: Dec 2002
Posts: 138
From: Asheville, NC
You won't need a hoist. I did mine in the driveway with a right angle drill and didnt even jack up the car. The front one hides behind that black wind deflector, the rear one goes up on the thin metal behind the rear bumper. Both the sides hide 100% if you pay attention to where you put the screws. I wire tied my transformer under the front end on the driver side where my Injen CAI filter is. It stays dry there and out of the way. Hope this helps man!! This is the first night time neon pic i took...so im still learning night pics! LOL
March-31st-2003 | 01:32 PM
#24
Promazda Member
Joined: Mar 2003
Posts: 417
From: Charlotte,NC/Miami,FL
i need some of these but i wanna get them after i get my kit on for the bulbs will be hidden i hate to ride down the road and see cars with the damn bulb hanging down , i hate that ****
Danny
Danny
April-2nd-2003 | 06:17 PM
#25
Registered User
Joined: Sep 2002
Posts: 213
From: Edmonton, Alberta CAN
Originally posted by Maxx Mazda
Well Em, you've seen mine in person, but here's a pic anyway. And they're dirty, so that's why they're dim.
Well Em, you've seen mine in person, but here's a pic anyway. And they're dirty, so that's why they're dim.
April-5th-2003 | 06:19 PM
#28
Thread Starter
I Can Be Teh W1N!!!!
Joined: Jul 2002
Posts: 1,870
From: Calgary
XtrmLzNC: where exacaly did you drill the screws for the sides? i drilled into the side skirt b/c of the way lite glow did their mounting brackets i couldn't put the anywhere else
EDIT: Nvm about the sides how the hell did you get the tube on the back installed? i can't drill through the bumper its too damn thick! i only got 1 titanium drill bitwhich is supposed to go through metal but it won't go through the bumper
EDIT: Nvm about the sides how the hell did you get the tube on the back installed? i can't drill through the bumper its too damn thick! i only got 1 titanium drill bitwhich is supposed to go through metal but it won't go through the bumper
Last edited by pr5owner; April-5th-2003 at 07:17 PM.
April-5th-2003 | 07:18 PM
#29
Registered User
Joined: Dec 2002
Posts: 138
From: Asheville, NC
They go UNDER the car man....behind the pinch molding. You cant see any of the tubes if they are put on right. IT looks dumb as hell when you can see them! LOL I used a right angle drill and mounted them. Mine are lite glow too and i didnt have any problems!!
April-5th-2003 | 07:22 PM
#30
Thread Starter
I Can Be Teh W1N!!!!
Joined: Jul 2002
Posts: 1,870
From: Calgary
Originally posted by XtrmLzNC
They go UNDER the car man....behind the pinch molding. You cant see any of the tubes if they are put on right. IT looks dumb as hell when you can see them! LOL I used a right angle drill and mounted them. Mine are lite glow too and i didnt have any problems!!
They go UNDER the car man....behind the pinch molding. You cant see any of the tubes if they are put on right. IT looks dumb as hell when you can see them! LOL I used a right angle drill and mounted them. Mine are lite glow too and i didnt have any problems!!